Admin Pouches
The Condor Annex Admin Pouch is a practical, modular pouch for storing pens, a notepad, and a pistol magazine. In addition to a holder for a pen, notepad, or papers, and a magazine clip or flashlight, there is also a fold-out transparent document compartment on the front. There is also a zippered main compartment.The pouch is equipped with the MOLLE attachment system and can therefore be attached to vests, backpacks, belts, or similar items.Details:Material: 100% PolyamideMain compartment with zipperFold-out transparent compartment for documents or IDSlide-in compartment with hook-and-loop fastenerUniversal magazine pouch or similar itemsHook-and-loop patch attachment on the frontMOLLE/PALS loop system on the back Weight: approx. 175g Dimensions: approx. 13.5 x 11.5 x 5 cm (LxWxD)
The Condor Annex Admin Pouch Ranger Green is a practical, modular pouch for storing pens, a notepad, and a pistol magazine.In addition to a holder for a pen, notepad, or papers, and a magazine clip or flashlight, there is also a fold-out transparent document compartment on the front. There is also a zippered main compartment.The pouch is equipped with the MOLLE attachment system and can therefore be attached to vests, backpacks, belts, or similar items.Details:Material: 100% PolyamideMain compartment with zipperFold-out transparent compartment for documents or IDSlide-in compartment with hook-and-loop fastenerUniversal magazine pouch or similar itemsHook-and-loop patch attachment on the frontMOLLE/PALS loop system on the back Weight: approx. 175g Dimensions: approx. 13.5 x 11.5 x 5 cm (LxWxD)
The Condor ID Pouch is a modular ID pouch that can be attached to a belt, vest, or backpack using Molle/PALS loops.The pouch can be folded out to provide direct access to the ID card holder.Details:Material: 100% polyamideFront with Velcro closure Transparent ID pocketZippered compartment Space for cards or ID cardsMolle/PALS loops for attachmentDimensions: approx. 13 x 10 cm (closed)
The Condor Modular Admin Pouch is a modular ID card pouch with a universal pocket and a large Velcro fastener on the front.Details:Material: 100% polyamideVelcro fastener on the front (11 x 12 cm)Zippered ID card pocketUniversal pocket with height-adjustable and removable cover for magazines or similar itemsFlat compartment with insertMolle system on the back for attachmentWeight: approx. 130gDimensions: approx. 17.5 x 18 cm
Condor T&T Pouch, the small office for on the go, ideal as a backpack addition.The pouch offers enough space for various writing pads, pens, etc., which are held securely in place thanks to the elastic bands. The wide-opening zipper provides perfect access to all documents, additionally secured with two hook-and-loop fasteners. A removable map pocket completes the package.The pouch is equipped with the MOLLE attachment system and can therefore be attached to vests, backpacks, belts, or similar items.Details:Material: 100% polyamideRemovable map pocket (28 x 15 cm)Slide pocketVarious elastic bands for equipment Interior pocket with zipperPadded pocketGenerous hook-and-loop fastener area on the frontWeight: approx. 510 gDimensions: 18 x 25.5 x 4.5 cm
Condor T&T Pouch Multicam, the small office for on the go, ideal as a backpack addition.The pouch offers enough space for various writing pads, pens, etc., which are held securely in place thanks to the elastic bands. The wide-opening zipper provides perfect access to all documents, additionally secured with two hook-and-loop fasteners. A removable map pocket completes the package.The pouch is equipped with the MOLLE attachment system and can therefore be attached to vests, backpacks, belts, or similar items.Details:Material: 100% PolyamideOriginal Crye-Precision MulticamRemovable map pocket (28 x 15 cm)Insert pocketVarious elastic bands for equipmentInternal zippered pocketPadded pocketGenerous hook-and-loop area on the frontWeight: approx. 510 gDimensions: 18 x 25.5 x 4.5 cm
Condor T&T Pouch Ranger Green, the small office for on the go, ideal as a backpack addition.The pouch offers enough space for various writing pads, pens, etc., which are held securely in place thanks to the elastic bands. The wide-opening zipper provides perfect access to all documents, additionally secured with two hook-and-loop fasteners. A removable map pocket completes the package.The pouch is equipped with the MOLLE attachment system and can therefore be attached to vests, backpacks, belts, or similar items.Details:Material: 100% polyamideRemovable map pocket (28 x 15 cm)Slide pocketVarious elastic bands for equipmentInterior pocket with zipperPadded pocketGenerous hook-and-loop fastener area on the frontWeight: approx. 510 gDimensions: 18 x 25.5 x 4.5 cm
The Condor VAS Admin Pouch is an admin panel for plate carriers, specifically designed for the modular VAS series.The VAS Admin Pouch provides quick access to essential items or magazines.Designed for mounting on the VAS 2.0 and similar plate carriers with a large central hook-and-loop panel (additional mounting hardware may be required for mounting on other carriers).Details:Material: Laser-cut laminateLightweight and flat single compartment with a zipper that is unobtrusive and does not restrict the field of visionHook-and-loop panel for shotgun strips or patchesGrooves for attaching bungee cords to secure additional gearHook backingPatch panel dimensions: approx. 23 x 5 cm (9" x 2")
The Templars Gear Astrolabe Gen2 Admin Panel provides space for a smartphone, maps, or similarly sized navigation devices, mounting at chest level on a plate carrier.The Admin Panel accommodates devices with dimensions of approximately 17 x 10 cm; these can be secured to the Astrolabe panel via hook-and-loop fasteners—even while still inside their protective cases (self-adhesive hook strips are included).Both the front and back surfaces are lined with loop Velcro. The Admin Panel features a thin, lightweight polymer frame that runs around the entire perimeter, offering optimal protection for the devices housed within.The panel is secured at the top by a retention flap and, when opened, is held at a 90-degree angle by means of a paracord tether. The front face features a 4x3 grid of laser-cut MOLLE slots, two of which are additionally lined with loop Velcro to allow for the attachment of patches.Details:Material: 100% Polyamide (Cordura® 500D), meeting Bundeswehr TL standardsMaterial (Side Panels): Polymer (Delrin®)Fits devices up to 17 x 10 cmTop-mounted retention flapLaser-cut MOLLE front panel with 4 x 3 rows (2 rows lined with loop Velcro)Includes adhesive hook-and-loop stripsParacord stopper for 90° opening angleWeight: approx. 96 gDimensions: 21 x 12 x 3 cm (H x W x D)Made in Poland
The Templars Gear Astrolabe Gen2 Admin Panel 3/5 Flecktarn provides space for a smartphone, maps, or similarly sized navigation devices, mounting at chest level on a plate carrier.The Admin Panel accommodates devices with dimensions of approximately 17 x 10 cm; these can be secured to the Astrolabe panel via hook-and-loop fasteners—even while still inside their protective cases (self-adhesive hook strips are included).Both the front and back surfaces are lined with loop Velcro. The Admin Panel features a thin, lightweight polymer frame that runs around the entire perimeter, offering optimal protection for the devices housed within.The panel is secured at the top by a retention flap and, when opened, is held at a 90-degree angle by means of a paracord tether. The front face features a 4x3 grid of laser-cut MOLLE slots, two of which are additionally lined with loop Velcro to allow for the attachment of patches. Original Flecktarn material in accordance with Bundeswehr Technical Specifications (TL), with IRR coating. Details:Material: 100% Polyamide (Cordura® 500D), meeting Bundeswehr TL standardsMaterial (Side Panels): Polymer (Delrin®)Fits devices up to 17 x 10 cmTop-mounted retention flapLaser-cut MOLLE front panel with 4 x 3 rows (2 rows lined with loop Velcro)Includes adhesive hook-and-loop stripsParacord stopper for 90° opening angleWeight: approx. 96 gDimensions: 21 x 12 x 3 cm (H x W x D)Made in Poland
The Templars Gear Astrolabe Gen2 Admin Panel Multicam provides space for a smartphone, maps, or similarly sized navigation devices, mounting at chest level on a plate carrier.The Admin Panel accommodates devices with dimensions of approximately 17 x 10 cm; these can be secured to the Astrolabe panel via hook-and-loop fasteners—even while still inside their protective cases (self-adhesive hook strips are included).Both the front and back surfaces are lined with loop Velcro. The Admin Panel features a thin, lightweight polymer frame that runs around the entire perimeter, offering optimal protection for the devices housed within.The panel is secured at the top by a retention flap and, when opened, is held at a 90-degree angle by means of a paracord tether. The front face features a 4x3 grid of laser-cut MOLLE slots, two of which are additionally lined with loop Velcro to allow for the attachment of patches.Details:Material: 100% Polyamide (Cordura® 500D), meeting Bundeswehr TL standardsMaterial (Side Panels): Polymer (Delrin®)Fits devices up to 17 x 10 cmTop-mounted retention flapLaser-cut MOLLE front panel with 4 x 3 rows (2 rows lined with loop Velcro)Includes adhesive hook-and-loop stripsParacord stopper for 90° opening angleWeight: approx. 96 gDimensions: 21 x 12 x 3 cm (H x W x D)Made in Poland
The Templars Gear Astrolabe Gen2 Admin Panel Multicam Black provides space for a smartphone, maps, or similarly sized navigation devices, mounting at chest level on a plate carrier.The Admin Panel accommodates devices with dimensions of approximately 17 x 10 cm; these can be secured to the Astrolabe panel via hook-and-loop fasteners—even while still inside their protective cases (self-adhesive hook strips are included).Both the front and back surfaces are lined with loop Velcro. The Admin Panel features a thin, lightweight polymer frame that runs around the entire perimeter, offering optimal protection for the devices housed within.The panel is secured at the top by a retention flap and, when opened, is held at a 90-degree angle by means of a paracord tether. The front face features a 4x3 grid of laser-cut MOLLE slots, two of which are additionally lined with loop Velcro to allow for the attachment of patches.Details:Material: 100% Polyamide (Cordura® 500D), meeting Bundeswehr TL standardsMaterial (Side Panels): Polymer (Delrin®)Fits devices up to 17 x 10 cmTop-mounted retention flapLaser-cut MOLLE front panel with 4 x 3 rows (2 rows lined with loop Velcro)Includes adhesive hook-and-loop stripsParacord stopper for 90° opening angleWeight: approx. 96 gDimensions: 21 x 12 x 3 cm (H x W x D)Made in Poland