Vanquish System (VAS)

Condor Vanquish Plate Carrier (VAS System) is a compact, modular plate carrier with a low-profile design.Various additional modules can be installed on the plate carrier, such as the VAS Mag Panel or Modular Panel. These are easily attached using the hook-and-loop fasteners and two Fastex fasteners.This allows the Vanquish Plate Carrier to be quickly converted for any situation, ensuring you are prepared for any deployment. The VAS can accommodate protective plates up to 25 x 30 cm in size in the front and back.Details:Material: 100% polyamide (Cordura)Modular VAS systemAdjustable side and heightModular webbing on the front and backSuitable for protective plates up to 25 x 30 cmVelcro area on the chest for badges or similar itemsPadded and removable shoulder padsLarge slip pocket with Velcro closure on the frontRescue handleWeight: approx. 770gPlate carrier is delivered empty and without additional pockets.

Select Color

The Condor Vanquish RS Plate Carrier from the Vanquish Armor System (VAS) provides the wearer with a lightweight plate carrier with a quick-release system and laser-cut MOLLE system. This makes the plate carrier not only easier to handle, but also extremely quick to remove in an emergency.The Condor Vanquish RS Plate Carrier can be easily adapted to any mission. The VAS system allows for the attachment of various front panels and cummerbunds (the QD Buckles Set 005-493 is required for attachment). In addition to a removable front and back padding, a flat, more tear-resistant laser-cut MOLLE system, and hook-and-loop fasteners on the back and front, it can accommodate protective plates up to 25 x 30 cm.Details: Material: 100% polyamide; 100% Polyester LiningLaser-cut Molle laminate on the front, back, and sidesQuick-release system on the shoulders and sides with ROC bucklesFlat document pocket with hook-and-loop fastenerAdjustable cummerbund with hook-and-loop pockets for protective platesRemovable inner paddingAdjustable shoulder strapsAccessible plate pocketSuitable for front and back protective plates 25 x 30 cmHook-and-loop patches on the front and backCompatible with VAS accessoriesRescue or recovery handleWeight: approx. 1189g Size: S or L

Select Color

Condor Vanquish VAS QD Buckles are the quick-release fasteners for the Condor Vanquish System.These are required if you want to use the modular VAS System on the Vanquish RS Plate Carrier.Details: Material: 100% plasticQuick-release designMOLLE compatibleSuitable for the Vanquish RS Plate Carrier VAS System, among othersPack of six

Select Color

The Condor VAS Kangaroo Mag Panel Gen2, for the modular VAS carrier system.This panel offers space for three 5.56 x 45 mm M4 or similar magazines and three pistol magazines. It is attached with hook-and-loop fasteners on the back and two Fastex clips on the front.Details:Material: 100% polyamide (Cordura)Three M4 magazine pouches with bungee cord fasteningThree pistol magazine pouches with height-adjustable hook-and-loop fasteningHook-and-loop backing and Fastex fasteners for attachmentWater drainage eyeletsWeight: approx. 260 gDimensions: approx. 27.5 x 20.5 x 7 cm

Select Color

Condor Vanquish Armor System (VAS) Recon Mag Pouch, an ideal addition when you need a lot of firepower.The Condor Vanquish Armor System (VAS) Recon Mag Pouch can accommodate 6 AR15 magazines (M4, HK416, etc.) and 6 pistol magazines. The panel is attached to the VAS Plate Carrier with hook-and-loop fasteners and snap fasteners. The modular design of the VAS allows the plate carrier to be customized for individual use. Details:Material: 100% Polyamide (Cordura)6 assault rifle magazine pouches for AR15 systems (e.g., M4, HK416, etc.)6 pistol magazine pouchesAssault rifle pouches secured with bungee cordHook-and-loop fasteners and snap fasteners for attachment to the carrier3 water drainage eyeletsWeight: approx. 380gDimensions: approx. 28 x 19.5 x 10 cm

Select Color

Condor VAS Side Plate Insert, modular pouches for attaching hard ballistic plates to the side of a plate carrier.The Condor Vanquish Armor System (VAS) Side Plate Pouch offers the option of attaching hard ballistic plates to the side of the VAS Plate Carrier. The VAS Cummerbund is required for this. Details:Material: 100% Polyamide (Cordura)Can accommodate 15 x 20 cm platesSold in pairsWeight approx. 150g per pairSuitable for the following plate carriers/cummerbunds:Modular OperatorExo Plate EnforcerReleasableVanquish RSCycloneVAS modular cummerbundRS cummerbund Retro KitLCS VAS modular cummerbund

Select Color

Condor VAS Triple Mag Panel for the modular VAS carrier system. The panel is an extremely flat, laser-cut laminate with a hook-and-loop backing.The LCS series uses a flat, lightweight, and robust polyamide material. The panel can accommodate three 5.56 NATO standard magazines (e.g., AR15). Using the hook-and-loop backing and snap fasteners, it can be attached to the LCS Vanquish Plate Carrier and the VAS Plate Carrier.The laser-cut MOLLE loops make them significantly lighter, more tear-resistant, and also have a flatter profile. Details:Material: 100% polyamideLaser-cut Molle panel on the frontSpace for three NATO 5.356 standard magazines (e.g., AR-15)Water drainage eyelets on the bottomBungee cord with pull tabs for securing magazinesHook and loop fastener on the back for attachment2 buckles for secure attachmentCompatible with the LCS Vanquish Plate Carrier and VAS Plate CarrierWeight: approx. 180g

Select Color